NEW ARRIVAL Tuya ZigBee Smart Dual Channel Energy Meter with 2 Clamp 80A - Available to Calibrate

Please Note this Item Requires a Tuya ZigBee Gateway to Work, If You Don't Have This Gateway , Please Click Below Any Picture to Buy One

App can display Channel A and B Real-time power, current, voltage for Forward and Reverse direction clrealy

The meter is allow to do calibration

2 Channels For Reverse and Forward direction

1 Channle or 2 Channels are available to Choose
And you can read from App for each Channel

- Real-time total power of 2 channels of reverse and forward direction
- Power for Channel A and B Separately(W)
- Current(mA)
- Voltage(V),
- Power factor, and Frequency(Hz)

Electricity Statistic for each channel in Forward and Reverse direction.

Hourly Elec. (KWh)
Daily Elec. (KWh),
Monthly Elec. (KWh)
-Yearly Elec. (KWh)

Technical data:
Rated Voltage:100-240V AC 50/60Hz

Measurable Current Range: 0.2A-80A

Protocal: ZigBee

WiFi Frequency: 2.4GHZ (Not Support 5Ghz)

Ambient Temperature Range:-10°C ~ 55°C

Electricity Statistic Channel A , B Separately and Total daily monthly, yearly Reverse and Forward Direction

Automation , It allows to make a Scene for this device working with other tuya devices

Set Automation for the Measured Device ,
For example, If Power or Current Is over the Value, then other tuya device starts to work .

Wiring Diagram

1. To measure the power 'from Grid' and 'To Grid'
Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module.

2. Measure the power consumption.
Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module.

Non-connect to Be Safe, Easy and Safe to Install

No need to change the wires, Just put the wire into the clamp, then it can measure, very easy.

Small Size Module , Easy to Install

We guarantee good quality, every product will be tested before delivery. Not before Order